Categories

Categories

Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...

Categories

Categories

Styccobond F84 Two Part Flooring Adhesive 2KG Kit

£23.17 (inc VAT) £19.31 (exc VAT)
  • Image 1

Styccobond F84 Two Part Flooring Adhesive 2KG Kit

£23.17 (inc VAT) £19.31 (exc VAT) Price Per Unit
SKU:
STYCCOF84-2
Weight:
2.00 KGS
Share

Product Description

STYCCOBOND F84 is a two-part reactive epoxy adhesive designed for installing a wide range of sheet floorcoverings onto STOPGAP ISOLATOR MEMBRANE and other suitable substrates. It is ideal for use in areas that are subject to surface water and areas that are heavily trafficked. When cured the adhesive is resistant to water, oil and grease. Although it is suitable for outdoor use it is not intended to be used as, or a substitute for a waterproof surface membrane.

STYCCOBOND F84 can be used for securing a wide range of vinyl and rubber floorcoverings, sheet linoleum and textile floorcoverings.

Refer to the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

STYCCOBOND F84 can be applied to STOPGAP smoothing underlayments, Isolator Membrane, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard, hardboard and bright steel.

STOPGAP waterproof surface membranes, sound flooring grade asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

When used in conjunction with STOPGAP ISOLATOR MEMBRANE, please refer to the technical data sheet for detailed guidance.

For details on other subfloors, contact our Technical Service Department.

TECHNICAL INFORMATION

Colour

Light beige when mixed

Consistency

Creamy

Coverage Rate (Approx.)

3mper kg using a 1.5mm x 5mm trowel or 2mper kg using a 2mm x 6mm trowel

Pot Life

Up to 20 minutes depending on temperature, humidity and absorbency of the subfloor

Working Time (Approx.)

1 hour at 20°C

Cure Time

At 20°C will allow foot traffic in 12 hours and normal use after 5 days. Avoid heavy point loads until the adhesive has fully cured – approximately 7 days

Product Reviews

Find Similar Products by Category

Related Products